Results for category "band"

6 Articles
Tri_Band_Booster_CDMA_850_DCS_LTE_1800_WCDMA_2100_MHZ_Cell_Phone_Signal_Repeater_01_ovs

Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater

Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater

Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
Please make sure the frequency band of your sim card is suitable for this item. Please make sure on your outside house can getting good signal that you want to amplify. On your cellphone can show 35 bar signal (at least catch -70dB-90dB). Otherwise the booster can not improve your signal. What’s in the package. 1 850/1800/2100 Tri Band Booster. 1 English User Manual. 1 Outdoor LPDA Antenna. 1 Indoor Panel Antenna. 1 13 Meters Cable. Frequency Range Uplink: 824849/17101785/19201980MHz. Frequency Range Downlink:869894/ 18051880/21102170MHz. Power Adapter: EU/US/AU/UK Plug. Power supply: AC:110220V; DC:12V 2A. Connector Type: N Female. Coverage: Up to 500 sqm without barrier. Band number: Band 5/3/1. Cable Length: 0.3 Meters. Antenna Type: Outdoor LPDA Antenna. Cable Length: 2 Meters. Antenna Type: Indoor Panel Antenna. 13 Meters Coaxial Cable. Connector Type: N-male to N-male. Cable Length: 13 Meters. Cable Type: RG6 Coaxial Cable. The outdoor antenna received the mobile signal from signal tower. The booster receives the outside signal from the outside antenna. The booster improve the outside signal and send it to the indoor antenna. The indoor antenna broadcasts the boosted signal to devices inside the home. Easy 4 steps of installation. Find an appropriate position where can getting strong mobile signal to install the outdoor antenna and toward to the cell signal tower. Connect the outdoor antenna to the signal booster via the cable. Connect the indoor antenna to the signal booster. Check all the connectors is tightened then plug in power. The item “Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater” is in sale since Friday, September 7, 2018. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “ezily0627″ and is located in Guangdong. This item can be shipped worldwide.
  • Brand: Eznlibek
  • Compatible Brand: Universal
  • Compatible Model: Universal
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China

Tri Band Booster CDMA 850 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
4G_Band_28_700MHz_Cell_Phone_Signal_Booster_Mobile_Repeater_for_Australia_700MHz_01_gw

4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz

4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz

4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
You may also like. Significantly improves voice and data quality. Greatly reduces disconnects and drops call. Works wirelessly with multiple cell phones and data cards simultaneously. Easy to install and operation. When self-oscillation happen or attenuation value reaches 20dB, power supply is shut down. Nput signals may be not enough. Self-oscillation happen , AGC is working. The attenuation value is more than 12dB. Power supply is shut down. Input AC100240V 50/60Hzoutput DC 5V. 3dBi Indoor Angle Antenna. 10dBi Outdoor Yagi Directional Antenna with 50ft Coaxial Cable. Three Months Free Replacement. More Units More Discount. This booster works for 700MHz. 0-1 bar outside signal may not be suitable for using it. Before ordering, please check your local signal frequency. For installation, you are supposed to pay attention to the following. 1 There is seperate wall between indoor and outdoor antennas to make two antenna signal not interfere with each other. To avoid interference, please make the distance of indoor and outdoor antenna more than 10 meters, let them not pointed at each other. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz” is in sale since Wednesday, November 13, 2019. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “eurfine” and is located in SHENZHEN. This item can be shipped worldwide.
  • Compatible Network: Optus;;Telstra;;Vodafone
  • Brand: ANYCALL
  • Compatible Brand: Universal
  • Model: AY-L07AUPLUS
  • MPN: AY-L07AUPLUS-AYW-K1
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor/Outdoor
  • Manufacturer warranty: Yes
  • Bundle Listing: No
  • Dimensions: 39.5X21.5x13cm
  • Weight: 1.5KG
  • Country/Region of Manufacture: China
  • Type: Booster
  • Compatible Model: Universal

4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
2G_3G_4G_LTE_Band_4_1700MHz_Home_offfice_Cell_Phone_Signal_Booster_Amplifier_Kit_01_pw

2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit

2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit
2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit
2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit
2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit
2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit
2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit

2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit
You may also like. Significantly improves voice and data quality 2. Greatly reduces disconnects and drops call 3. Works wirelessly with multiple cell phones and data cards simultaneously 4. Easy to install and operation. Three Months Free Replacement. This product with CE FCC Approved. Before ordering: wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. After Sale: If any problem with the booster, please do not open the return request or case which can bring great harm to our sore, please contact the customer service and we will try our best to solve. What’s the in the package. 1 1700MHz Booster 1 Power Adapter 1 Mounting Screw Kit 1 English User Manual 1 Indoor Right Angle Antenna 1 Outdoor Yagi Antenna with 10m (about 32.8 feet) Cable. Input AC100240V 50/60Hzoutput DC 5V 0.35A. Make sure there is a separate wall between indoor and outdoor antennas, so that the two antennas signal don’t interfere with each other. Please make the distance of indoor and outdoor antenna is more than 10 meters and do not put them in the same level. The yagi antenna should be put horizontally, not vertically. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit” is in sale since Tuesday, November 5, 2019. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “bestbooster” and is located in Shenzhen. This item can be shipped to United States.
  • Brand: PROUTONE
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor/Outdoor
  • MPN: PR-K-A65A-AYB
  • Country/Region of Manufacture: China
  • Compatible Network: AT&T
  • Model: PR-K-A65A-AYB
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Dimensions: 109x63x16mm
  • Weight: Set:1.5KG; Booster:0.2KG
  • Color: Blue
  • Number of Ports: 2
  • Cable Length: 15 m
  • Mounting Location: Desk
  • Material: Aluminum

2G 3G 4G LTE Band 4 1700MHz Home offfice Cell Phone Signal Booster Amplifier Kit
4G_Band_28_700_900_1800_2100_2600_MHz_Cell_Phone_Signal_Booster_Antenna_Car_Use_01_usew

4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use

4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use
4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use
4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use
4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use
4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use
4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use

4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use
You may also like. It is best used in the following applications. 1Wide Input Voltage. Input DC Voltage Range 5-15V. When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4AGC (Automatic Gain Control). When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5Automatic Power Shut-down. When the self-oscillation happens, and the link attenuation value reaches 20dB, the MCU sends out the instruction and shut-down the PA. 6MGC (Manual Gain Control). In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7ALC(Automatic Level Control). Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Three Months Free Replacement. This product with CE FCC Approved. LTE 700(Band 28). LTE 2600(Band 7). When self-oscillation occurs or attenuation value reaches 20dB, the corresponding link power supply is shut down. Self-oscillation occurs and the corresponding link is automatically closed. Car Charger Input DC1224V. 1 45dB Car Use Repeater. 1 3dBi Gain Outside Magnetic Mounted Antenna. 1 3dBi Gain Inside Patch Mounted Antenna. 1 Cigarette Lighter Adapter. 2 Velcro for Mounting. 1 English User Manual. 2: This item is suitable for using in the car. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use” is in sale since Tuesday, August 28, 2018. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “eurfine” and is located in SHENZHEN. This item can be shipped worldwide.
  • Compatible Network: Optus
  • Brand: ANYCALL
  • MPN: AY-GDWL45AU
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Car Roof
  • Model: AY-GDWL45AU
  • Bundle Listing: No
  • Country/Region of Manufacture: China
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Custom Bundle: No
  • Bundle Description: Does Not Apply
  • Dimensions: 160mm*61mm*18mm
  • Modified Item: No
  • Modification Description: Does not apply
  • Weight: 0.7KG
  • Non-Domestic Product: No
  • Applicable Regions: Australia, New Zealand

4G Band 28 700/900/1800/2100/2600/MHz Cell Phone Signal Booster Antenna Car Use
4G_Band_28_700MHz_Cell_Phone_Signal_Booster_Mobile_Repeater_for_Australia_700MHz_01_elv

4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz

4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz

4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz
You may also like. Significantly improves voice and data quality. Greatly reduces disconnects and drops call. Works wirelessly with multiple cell phones and data cards simultaneously. Easy to install and operation. When self-oscillation happen or attenuation value reaches 20dB, power supply is shut down. Nput signals may be not enough. Self-oscillation happen , AGC is working. The attenuation value is more than 12dB. Power supply is shut down. Input AC100240V 50/60Hzoutput DC 5V. 3dBi Indoor Angle Antenna. 10dBi Outdoor Yagi Directional Antenna with 50ft Coaxial Cable. Three Months Free Replacement. More Units More Discount. This booster works for 700MHz. 0-1 bar outside signal may not be suitable for using it. Before ordering, please check your local signal frequency. For installation, you are supposed to pay attention to the following. 1 There is seperate wall between indoor and outdoor antennas to make two antenna signal not interfere with each other. To avoid interference, please make the distance of indoor and outdoor antenna more than 10 meters, let them not pointed at each other. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz” is in sale since Thursday, June 7, 2018. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “eurfine” and is located in SHENZHEN. This item can be shipped worldwide.
  • Compatible Network: Optus;;Telstra;;Vodafone
  • Brand: ANYCALL
  • Compatible Brand: Universal
  • Model: AY-L07AUPLUS
  • MPN: AY-L07AUPLUS-AYW-K1
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor/Outdoor
  • Manufacturer warranty: Yes
  • Bundle Listing: No
  • Dimensions: 39.5X21.5x13cm
  • Weight: 1.5KG
  • Country/Region of Manufacture: China
  • Type: Booster
  • Compatible Model: Universal

4G Band 28 700MHz Cell Phone Signal Booster Mobile Repeater for Australia 700MHz

Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle

Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle

Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle
Uplink:698MHz-716MHz, Downlink:728MHz-746MHz. Operation Frequency: Band 12. Emission Designator:LTE(G7D). Max output power:27dBm. I/O Port:FME Male on both ends. Main Power:Input:12-24V Output:DC 9V 1.5A. 1 x signal repeater booster. 1 x Inside patch mounted antenna. 1 x Outside magnetic mounted antenna. 1 x English User Manual. This device is strong to boost multiple users with maximum power, is cost effective solution with weak outside signal. Please check your frequency before purchasing. The frequency is the most important thing to choose a signal booster, because the GSM, 3G or 4G means different frequency in different countries. You should get 3 bars of stable signal in the location where the outdoor antenna is fixed in, or the booster can’t work well. We maintain high standards of excellence and strive for. We strive to providing the greatest service and. Bringing the highest satisfaction to all of our customers. It is impossible to address issued if we do not know about them! We will try our best to reply all emails within 24 hours. However, no emails will be replied during weekends or holidays. Please allow up to 48 hours delay in receiving our response after. Long weekends or holidays. (excluding items damaged and/or misused after receipt). (and the original packaging, if possible). You must tell us what the defect is and give us your order number. GMT+8 Monday To Friday 9:00-18:00. Saturday 9:00-12:00. The item “Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle” is in sale since Wednesday, July 26, 2017. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “fuzhixing2014″ and is located in Walton, Kentucky. This item can be shipped to United States.
  • Compatible Network: AT&T
  • Model: XWAC70-2
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Dimensions: 9.6 x 6.2 x 3.2 inches
  • Custom Bundle: Yes
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Weight: 1.46 pounds
  • Compatible Model: Universal
  • I/O Port: FME Male on both ends
  • Main Power: Input:12-24V Output:DC 9V 1.5A
  • Remote Antenna: Indoor/Outdoor
  • Manufacturer warranty: Yes
  • MPN: Does Not Apply
  • Frequency range: 698MHz-716MHz,728MHz-746MHz
  • Operation Frequency: Band 12
  • Emission Designator: LTE(G7D)
  • Max output power: 27dBm
  • Max Gain: 55dB
  • Brand: Unbranded
  • Bundle Description: signal repeater booster/Inside patch mounted antenna/Outside magnetic mounted antennaPower Adapter

Band 12/17 Cell Phone Signal Booster 4G LTE 700MHz AT&T T-Mobile for Car Vehicle