Results for category "85017001900mhz"

4 Articles
850_1700_1900MHz_2G_3G_4G_Cell_Phone_Signal_Booster_70dB_for_Weak_Signal_Areas_01_dzb

850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas

850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas
850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas
850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas
850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas
850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas
850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas
850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas

850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas
You may also like. Input DC Voltage Range 5-15V. When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4AGC (Automatic Gain Control). When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5Automatic Power Shut-down. When the self-oscillation happens, and the link attenuation value reaches 20db, the MCU sends out the instruction and shut-down the PA. 6MGC (Manual Gain Control). In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7 ALC(Automatic Level Control). Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Frequency Range: band 5, band 2, band 4. Band 5: Uplink:824 849MHz Downlink: 869 894MHz. Band 2: Uplink:1850 1910MHz Downlink:1930 1990MHz. Band 4: Uplink:1710 1755MHz Downlink:2110 2155MHz. Automatic shut down: When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down. Power Supply: Input AC100240V 50/60Hzoutput DC. I /O Port: N-Female. Nput signals may be not enough. Self-oscillation happen , AGC is working. The attenuation value is more than 12dB. Power supply is shut down. 1 850/1700/1900MHz Tri-band Repeater. 1 Mounting Screw Kit. 1 English User Manual. 1 8dBi Indoor Panel Antenna with 20 Feet Cable. 1 10dBi Gain Outdoor Yagi Antenna with 50 Feet Cable. Note: This booster just can adapt to 850/1700/1900MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas” is in sale since Wednesday, December 26, 2018. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “eurfine” and is located in SHENZHEN. This item can be shipped worldwide.
  • Brand: ANYCALL
  • Model: AY-CPA70PLUS
  • MPN: AY-CPA70PLUS-PYW-K4
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor & Outdoor
  • Bundled Items: Coaxial Cable;;Wall Charger/Adapter
  • Country/Region of Manufacture: China
  • Frequency Bands: 850/1700/1900MHz
  • Gain: 70dB
  • Usage: Boost cell phone signal
  • Compatible Network: AT&T
  • Bundle Listing: No
  • Compatible Model: Universal
  • Manufacturer warranty: Yes

850/1700/1900MHz 2G 3G 4G Cell Phone Signal Booster 70dB for Weak Signal Areas
850_1700_1900MHz_Cell_Phone_Signal_Booster_for_Remote_area_Boosts_3G_4G_Signal_01_ai

850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal

850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal
850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal
850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal
850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal
850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal
850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal
850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal

850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal
You may also like. Note: This booster just can adapt to 850/1700/1900MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. 1 850/1700/1900MHz Tri-band Repeater. 1 Mounting Screw Kit. 1 English User Manual. 1 6-8dBi Indoor Panel Antenna with 20 Feet Cable. 1 9dBi Gain Outdoor Yagi Antenna with 50 Feet Cable. DB / 1dB step. Ion happen or attenuation value reaches 20dB, power supply is shut down. Nput signals may be not enough. Ion happen , AGC is workingt. He attenuation value is more than. RED: power supply is shut down. 50/60Hzoutput DC 12V 0.3A. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. This signal booster can boost 2G 3G or 4G signalit depends on your signal band so you can enjoy clearer voice call or faster data. The cellphone signal booster is suitable for meeting rooms, small supermarkets Village, Garage, Basement, Home, Office , hotel, bars and so on. The item “850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal” is in sale since Wednesday, November 21, 2018. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “eurfine” and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: ANNTLENT
  • Model: AN-CPA70PLUS
  • MPN: AN-CPA70PLUS-PYW-K4
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor & Outdoor
  • Bundled Items: Coaxial Cable;;Wall Charger/Adapter
  • Country/Region of Manufacture: China
  • Frequency Bands: 850/1700/1900MHz
  • Gain: 70dB
  • Usage: Boost cell phone signal
  • UPC: 6933101730696
  • Compatible Network: AT&T
  • Compatible Model: Universal

850/1700/1900MHz Cell Phone Signal Booster for Remote area Boosts 3G 4G Signal
GSM_3G_4G_850_1700_1900MHz_Cell_Phone_Signal_Booster_70dB_High_Gain_Repeater_Kit_01_kq

GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit

GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit
GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit
GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit
GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit
GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit
GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit

GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit
You may also like. Frequency Range: band 5, band 2, band 4. Band 5: Uplink:824 849MHz Downlink: 869 894MHz. Band 2: Uplink:1850 1910MHz Downlink:1930 1990MHz. Band 4: Uplink:1710 1755MHz Downlink:2110 2155MHz. Automatic shut down: When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down. Power Supply: Input AC100240V 50/60Hzoutput DC 12V 0.3A. I /O Port: N-Female. 1 850/1700/1900MHz Tri-band Repeater. 1 Mounting Screw Kit. 1 English User Manual. 1 3dBi Gain Indoor Right Angle Antenna. 1 9dBi Gain Outdoor Yagi Antenna with 50 Feet Cable. 1Wide Input Voltage. Input DC Voltage Range 5-15V. When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4AGC (Automatic Gain Control). When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5Automatic Power Shut-down. When the self-oscillation happens, and the link attenuation value reaches 20db, the MCU sends out the instruction and shut-down the PA. 6MGC (Manual Gain Control). In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7ALC(Automatic Level Control). Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Nput signals may be not enough. The attenuation value is more than 12dB. Three Months Free Replacement. Support Wholesales, More Units More Discount. Note: This booster just can adapt to 850/1700/1900MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. ANYCALL booster provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, underground parking lots and other small weak signal area. Welcome you all to order. We provide the best sale service and after sale service. The item “GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit” is in sale since Monday, December 11, 2017. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “repeaterbay” and is located in City of Industry California. This item can be shipped to United States.
  • Brand: ANYCALL
  • Model: AY-CPA70PLUS
  • MPN: AY-CPA70PLUS-AYW-K1
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor & Outdoor
  • Country/Region of Manufacture: China
  • Frequency Bands: 850/1700/1900MHz
  • Gain: 70dB
  • Usage: Boost cell phone signal
  • UPC: 6933101730993
  • Compatible Network: AT&T
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Bundle Listing: No
  • Dimensions: 39.5*21.5*13.0cm
  • Weight: 1.86kg

GSM 3G 4G 850/1700/1900MHz Cell Phone Signal Booster 70dB High Gain Repeater Kit

850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater

850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater
850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater
850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater
850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater
850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater
850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater
850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater
850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater

850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater
You may also like. Frequency Range: band 5, band 2, band 4. Band 5: Uplink:824 849MHz Downlink: 869 894MHz. Band 2: Uplink:1850 1910MHz Downlink:1930 1990MHz. Band 4: Uplink:1710 1755MHz Downlink:2110 2155MHz. Automatic shut down: When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down. Power Supply: Input AC100240V 50/60Hzoutput DC 5V 2A. I /O Port: N-Female. 1 850/1700/1900MHz Tri-band Repeater. 1 Mounting Screw Kit. 1 English User Manual. 1 8dBi Gain Indoor Panel Antenna with 20 Feet Cable. 1 9dBi Gain Outdoor Yagi Antenna with 50 Feet Cable. 1 Wide Input Voltage. Input DC Voltage Range 5-15V. When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4 AGC (Automatic Gain Control). When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5 Automatic Power Shut-down. When the self-oscillation happens, and the link attenuation value reaches 20db, the MCU sends out the instruction and shut-down the PA. 6 MGC (Manual Gain Control). In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7 ALC(Automatic Level Control). Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Nput signals may be not enough. The attenuation value is more than 12dB. Three Months Free Replacement. Support Wholesale , More Units More Discount. Note: This booster just can adapt to 850/1700/1900MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. ANNTLENT booster provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, underground parking lots and other small weak signal area. Welcome you all to order. We provide the best sale service and after sale service. The item “850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater” is in sale since Monday, December 11, 2017. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “repeaterbay” and is located in City of Industry California. This item can be shipped to United States.
  • Brand: ANNTLENT
  • Model: AN-CPA70PLUS
  • MPN: AN-CPA70PLUS-PYW-K4
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor & Outdoor
  • Country/Region of Manufacture: China
  • Frequency Bands: 850/1700/1900MHz
  • Gain: 70dB
  • Usage: Boost cell phone signal
  • UPC: 6933101730696
  • Compatible Network: AT&T
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Dimensions: 39.5*21.5*15.5cm
  • Weight: 2.33kg

850/1700/1900MHz GSM 3G 4G Verizon ATT Cell Phone Signal Booster 70dB Repeater