Monthly archives "April"

55 Articles
900_1800_2100MHz_2G_3G_4G_Cell_Phone_Signal_Booster_65dB_LTE_Mobile_Repeater_Kit_01_ru

900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit

900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit

900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
You may also like. The repeater works with two antennas (included in the kit). And the better the outside signal, the more coverage the indoor antenna can create. The miniature repeater with its unique compact, light weight, easy installation, small interference on the network, the reliability and stability of the unique advan-tages, has been widely, especially suitable for the modern city building area indoor coverage. The miniature repeater is mainly used in office buildings, shop-ping malls, large underground parking field, exhibition center, workshop. Signal using a small power cover-age within building will be more uniform, reduce the cost of inputs. Outdoor Yagi antenna receives the downlink signal from the base Station, and the mini wattage repeater amplifies the signal. The indoor retransmission antenna will transmits signal, covering user’s home or office. Uplink signals from mobile phones is transmitted to repeater via retransmitting antenna, upon the uplink low noise amplification, the signal is transmitted to the base station through donor end. Frequency Range(GSM+DCS+WCDMA): 890915/17101785/19201980 MHz(Uplink) 935960/18051880/21102170 MHz(Downlink). Output Power: 15±2dBm(Uplink), 20±2dBm(Downlink). Gain: 60±2dB(Uplink), 65±2dB(Downlink). Band width: 25/75/60M(Uplink), 25/75/60M(Downlink). Ripple in Band:? 4dB. Power Supply: AC100240V, 50/ 60HzDC12V 2A. Power Comsumption: < 24W. Cooling: Heatsink Convection cooling. Net weight: < 0.9Kg. Packing size(DWH): 29018050mm. Gross weight: < 1.14Kg. Installation Type: Wall Installation. Operating Temperature: -10? 55? Max power: 50 W. Nominal Impedance: 50? Connector: N female or customized. Rated Wind Velocity: 60m/s. Polarization: Horizontal or Vertical. Max power: 100 W. Connector­­­: N female or customized. Mounting Kits: Gusset plate Including. 1x Tri Band Signal Repeater. 1x 12M Black Cable. Connect the indoor antenna to the Booster Base Unit and place where you need improved signal. There should be a minimum of 15 vertical feet of separation between the Base Unit and External Antenna. Run the RG-6 coax cable (32 feet) between the Base Unit and External Antenna. Connect the power supply to the Booster Base Unit and plug into a power outlet and you are done! We don't accept dispatch request to the third country. My goal is to make sure you are a happy customer and pleasant shopping with us. Once you have any quesiton , we will help. Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. We committed to provide good quality products to our customers. If you don't like an item within 30 days you get (non-quality problem). The item "900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit" is in sale since Thursday, April 11, 2019. This item is in the category "Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters". The seller is "goboost2020" and is located in Foshan. This item can be shipped worldwide.
  • Brand: Lintratek
  • Model: KW20C-GDW
  • Gain: 65dB
  • Power Supply: AC100~240V, 50/ 60HzDC12V 2A
  • Suitable For Countries: Russia, Spain, France, Brazil, Europe, etc
  • Coverage: 800-2000Sqm without Barriers
  • Improve: 2G 3G 4G Network
  • LCD Display: Yes
  • Compatible Brand: Universal
  • MPN: Does Not Apply
  • Compatible Model: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor/Outdoor
  • Manufacturer warranty: Yes
  • Custom Bundle: No
  • Dimensions: 230*180*20mm
  • Weight: 1.2kg
  • Country/Region of Manufacture: China
  • Output Power: 20dBm
  • Installation Type: Wall Installation
  • Compatible Network: AT&T
  • Frequency range 2: Downlink:935~960/1805~1880+2110~2170 MHz
  • Frequency range 1: Uplink:890~915/1710~1785+1920~1980 MHz

900/1800/2100MHz 2G 3G 4G Cell Phone Signal Booster 65dB LTE Mobile Repeater Kit
2G_3G_4G_900_1800_2100MHz_Cell_Phone_Signal_Booster_70dB_LTE_Mobile_Repeater_Kit_01_evp

2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit

2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit
2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit
2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit
2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit
2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit
2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit

2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit
You may also like. 1 Wide Input Voltage. Input DC Voltage Range 5-15V. When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4 AGC (Automatic Gain Control). When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5 Automatic Power Shut-down. When the self-oscillation happens, and the link attenuation value reaches 20dB, the MCU sends out the instruction and shut-down the PA. 6 MGC (Manual Gain Control). In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7 ALC(Automatic Level Control). Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Significantly improves voice and data quality. Greatly reduces disconnects and drops call. Works wirelessly with multiple cell phones and data cards simultaneously. Easy to install and operation. 20dB / 1dB step. When self-oscillation happen or attenuation value reaches 20dB, power supply is shut down. The attenuation value is more than 12dB. Output DC 5V 2A. 1 8dBi Gain Indoor Panel Antenna with 20ft Coaxial Cable. 1 9dBi Gain Outdoor Yagi Directional Antenna with 50ft Coaxial Cable. 4 Screws for Mounting. Three Months Free Replacement. Support WholesalesMore Units More Discount. This booster works for. 0-1 bar outside signal may not be suitable for using it. Before ordering, please check your local signal frequency. For installation, you are supposed to pay attention to the following. There is seperate wall between indoor and outdoor antennas to make two antenna signal not interfere with each other. To avoid interference, please make the distance of indoor and outdoor antenna more than 10 meters, let them not pointed at each other. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. ANYCALLT booster provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, underground parking lots and other small weak signal area. Welcome you all to order. We provide the best sale service and after sale service. The item “2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit” is in sale since Wednesday, May 30, 2018. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “repeaterbay” and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: ANYCALL
  • MPN: AY-GDW70PLUS-PYW-K4
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor/Outdoor
  • Model: AY-GDW70PLUS
  • Compatible Network: E-plus
  • Country/Region of Manufacture: China
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Bundle Listing: No
  • Weight: 2.33kg
  • Dimensions: 39.5*21.5*15.5cm

2G 3G 4G 900/1800/2100MHz Cell Phone Signal Booster 70dB LTE Mobile Repeater Kit
Samsung_Galaxy_S8_SM_G950F_64GB_Black_Unlocked_NO_SIGNAL_01_jdkg

Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL

Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL
Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL
Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL
Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL
Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL
Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL

Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL
No Google lock and everything working perfectly. The item “Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL” is in sale since Saturday, April 20, 2019. This item is in the category “Mobile Phones & Communication\Mobile & Smart Phones”. The seller is “leynos76″ and is located in Washington. This item can be shipped worldwide.
  • Model Number: A2105 (GSM)
  • Brand: Samsung
  • Model: Samsung Galaxy S8
  • Style: Bar
  • Storage Capacity: 64 GB
  • Network: Unlocked
  • Screen Size: 5.8 in
  • Connectivity: Bluetooth
  • Colour: Grey
  • Processor: Octa Core
  • Operating System: Android
  • Lock Status: Factory Unlocked
  • Memory Card Type: MicroSD
  • Manufacturer Colour: Orchid Gray
  • Camera Resolution: 12.0MP
  • MPN: SM-G950FZVABTU

Samsung Galaxy S8 SM-G950F 64GB Black (Unlocked) NO SIGNAL
4G_LTE_Verizon_700MHz_2G_3G_850_1900MHz_Cell_Phone_Signal_Repeater_70dB_Booster_01_sv

4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster

4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster
4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster
4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster
4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster
4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster
4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster
4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster

4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster
You may also like. Frequency Range: band 13 , band 5 , band 2. Band 13: Uplink: 776 787MHz Downlink: 746 757 MHz. Band 5 : Uplink: 824 849MHz Downlink: 869 894MHz. Band 2 : Uplink: 1850 1910MHz Downlink: 1930 1990MHz. When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down. Power Supply: Input AC100240V 50/60Hzoutput DC 5V 2A. I /O Port: N-Female. 1 700Verizon/850/1900MHz Tri-band Repeater. 1 Mounting Screw Kit. 1 English User Manual. 1 3dBi Gain Indoor Whip Antenna. 1 7-9dBi Gain Outdoor Yagi Antenna with 50 Feet Cable. Input DC Voltage Range 5-15V. When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4AGC (Automatic Gain Control). When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5Automatic Power Shut-down. When the self-oscillation happens, and the link attenuation value reaches 20db, the MCU sends out the instruction and shut-down the PA. 6MGC (Manual Gain Control). In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7 ALC(Automatic Level Control). Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Nput signals may be not enough. Self-oscillation happen , AGC is working. The attenuation value is more than 12dB. Power supply is shut down. Three Months Free Replacement. Support WholesalesMore Units More Discount. Note: This booster just can adapt to 700Verizon/850/1900MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster” is in sale since Tuesday, December 19, 2017. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “eurfine” and is located in SHENZHEN. This item can be shipped worldwide.
  • Brand: ANYCALL
  • Model: AY-CPL70VPLUS
  • MPN: AY-CPL70VPLUS-AYW-K1
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor & Outdoor
  • Bundled Items: Coaxial Cable;;Wall Charger/Adapter
  • Country/Region of Manufacture: China
  • Frequency Bands: 700Verizon/850/1900MHz
  • Gain: 70dB
  • Usage: Boost cell phone signal
  • UPC: 6933101730955
  • Compatible Network: AT&T
  • Bundle Listing: No
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Dimensions: 39.5X21.5×13.0cm
  • Weight: 1.86KG

4G LTE Verizon 700MHz 2G 3G 850/1900MHz Cell Phone Signal Repeater 70dB Booster
Tri_band_Cell_Phone_Signal_Booster_Kit_Boost_2G_3G_4G_Signal_850_1700_1900MHz_01_tm

Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz

Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz
Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz
Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz
Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz
Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz
Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz
Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz

Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz
You may also like. This signal booster can boost 2G 3G 4G signal for 850/1700/1900MHz Signal operator, so you can enjoy clearer voice call and faster data. The cellphone signal booster is suitable for meeting rooms, small supermarkets Village, Garage, Basement, Home, Office , hotel, bars and so on. Frequency Range: band 5, band 2, band 4. Band 5: Uplink:824 849MHz Downlink: 869 894MHz. Band 2: Uplink:1850 1910MHz Downlink:1930 1990MHz. Band 4: Uplink:1710 1755MHz Downlink:2110 2155MHz. Automatic shut down: When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down. Power Supply: Input AC100240V 50/60Hzoutput DC 5V 2A. I /O Port: N-Female. Nput signals may be not enough. Twinkly YELLOW self-oscillation happen , AGC is working. The attenuation value is more than 12dB. Continuous RED power supply is shut down. 1 850/1700/1900MHz Tri-band Repeater. 1 Mounting Screw Kit. 1 English User Manual. 1 3dBi Indoor Right Angle Antenna. 1 6dBi Gain Outdoor Omni Directional Antenna with 50 Feet Cable. Manual Gain Control : In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. Automatic Level Control : Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Note: This booster just can adapt to 850/1700/1900MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz” is in sale since Tuesday, November 20, 2018. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “eurfine” and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: ANNTLENT
  • Model: AN-CPA70PLUS
  • MPN: AN-CPA70PLUS-AOW-K2
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor & Outdoor
  • Bundled Items: Coaxial Cable;;Wall Charger/Adapter
  • Country/Region of Manufacture: China
  • Frequency Bands: 850/1700/1900MHz
  • Gain: 70dB
  • Compatible Network: AT&T
  • Bundle Listing: No
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Custom Bundle: No
  • Bundle Description: No
  • Dimensions: 31.0X27.0X10.0cm
  • Modified Item: No
  • Modification Description: Does not apply
  • Weight: 1.9KG
  • Non-Domestic Product: Yes
  • Applicable Regions: CA US

Tri-band Cell Phone Signal Booster Kit Boost 2G 3G 4G Signal 850/1700/1900MHz
4G_LTE_AT_T_700_850_1900MHz_GSM_3G_70dB_Cell_Phone_Signal_Booster_Repeater_Kit_01_txfr

4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit

4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit
4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit
4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit
4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit
4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit
4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit

4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit
You may also like. Frequency Range: band 12, 17 , band 5, band 2 band 12,17: Uplink: 698 716MHz Downlink: 728 746MHz band 5 : Uplink: 824 849MHz Downlink: 869 894MHz band 2 : Uplink: 1850 1910MHz Downlink: 1930 1990MHz Max Gain: 70dB Automatic shut down : When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down. Power Supply: Input AC100240V 50/60Hzoutput DC 5V 2A Dimensions: 170mm90mm23mm I /O Port: N-Female. Package: 1 700AT&T/850/1900MHz Tri-band Repeater 1 AC Adapter 1 Mounting Screw Kit 1 English User Manual 1 3dBi Indoor Right Angle Antenna 1 6dBi Gain Outdoor Omni Directional Antenna with 50 Feet Cable. 3 Inactivity Mode: When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4AGC (Automatic Gain Control): When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5Automatic Power Shut-down: When the self-oscillation happens, and the link attenuation value reaches 20db, the MCU sends out the instruction and shut-down the PA. 6MGC (Manual Gain Control): In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7 ALC(Automatic Level Control): Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Nput signals may be not enough. The attenuation value is more than 12dB. Three Months Free Replacement. Support WholesalesMore Units More Discount. Note: This booster just can adapt to 700AT&T/850/1900MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. ANYCALL booster provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, underground parking lots and other small weak signal area. Welcome you all to order. We provide the best sale service and after sale service. The item “4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit” is in sale since Tuesday, December 19, 2017. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “bestbooster” and is located in Rowland Heights, California. This item can be shipped to United States.
  • Compatible Network: AT&T
  • Bundled Items: Coaxial Cable;;Wall Charger/Adapter
  • Frequency Bands: 700AT&T/850/1900MHz
  • Model: AN-CPL70APLUS
  • Country/Region of Manufacture: China
  • Compatible Brand: Universal
  • Gain: 70dB
  • Usage: Boost cell phone signal
  • UPC: 6933101730924
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor & Outdoor
  • MPN: AN-CPL70APLUS-AOW-K2
  • Brand: ANNTLENT
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Weight: 1.96kg
  • Dimensions: 31.0X27.0X10.0cm

4G LTE AT&T 700/850/1900MHz GSM 3G 70dB Cell Phone Signal Booster Repeater Kit
AT_T_700MHz_850_1900MHz_Cell_Phone_Signal_Booster_N_male_Amplifier_Yagi_Antenna_01_kcr

AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna

AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna
AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna
AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna
AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna
AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna
AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna
AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna

AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna
You may also like. Frequency Range: band 12, 17 , band 5, band 2. Band 12,17: Uplink: 698 716MHz Downlink: 728 746MHz. Band 5 : Uplink: 824 849MHz Downlink: 869 894MHz. Band 2 : Uplink: 1850 1910MHz Downlink: 1930 1990MHz. When self – oscillate happened or attenuation value reaches 20dB, power supply is shut down. Power Supply: Input AC100240V 50/60Hzoutput DC 5V 2A. I /O Port: N-Female. 1 700AT&T/850/1900MHz Tri-band Repeater. 1 Mounting Screw Kit. 1 English User Manual. 1 8dBi Gain Indoor Panel Antenna with 20 Feet Cable. 1 10dBi Gain Outdoor Yagi Antenna with 50 Feet Cable. Input DC Voltage Range 5-15V. When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4AGC (Automatic Gain Control). When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5Automatic Power Shut-down. When the self-oscillation happens, and the link attenuation value reaches 20db, the MCU sends out the instruction and shut-down the PA. 6MGC (Manual Gain Control). In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7 ALC(Automatic Level Control). Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Nput signals may be not enough. Self-oscillation happen , AGC is working. The attenuation value is more than 12dB. Power supply is shut down. Three Months Free Replacement. Support WholesalesMore Units More Discount. Note: This booster just can adapt to 700AT&T/850/1900MHz frequency signal user, wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna” is in sale since Friday, December 29, 2017. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “besure2015″ and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: ANNTLENT
  • Model: AN-CPL70APLUS
  • MPN: AN-CPL70APLUS-PYW-K4
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor & Outdoor
  • Bundled Items: Coaxial Cable;;Wall Charger/Adapter
  • Country/Region of Manufacture: China
  • Frequency Bands: 700AT&T/850/1900MHz
  • Gain: 70dB
  • Usage: cell phone signal boost
  • UPC: 6933101730610
  • Compatible Network: AT&T
  • Bundle Listing: No
  • Compatible Model: Universal
  • Manufacturer warranty: Yes
  • Dimensions: 39.5X21.5×15.5cm
  • Weight: 2.33KG

AT&T 700MHz 850/1900MHz Cell Phone Signal Booster N-male Amplifier Yagi Antenna
4G_700MHz_Cell_Phone_Signal_Booster_Verizon_LTE_Mobile_Repeater_Kit_for_Band_13_01_zhnh

4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13

4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13
4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13
4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13
4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13
4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13
4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13
4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13

4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13
You may also like. Small Size, Light Weight, Beautiful Repeater. FCC ID authentication certificated. Three Months Free Replacement. More Units More Discount. 1 65dB 700MHz Single Band Repeater. 5dBi Indoor Ceiling Antenna with 5 Meters (16.40 feet) Coaxial Cable. 1 8dBi Outdoor Yagi Antenna with 10 Meters (32.80 feet) Coaxial Cable. 4 Screws for Mounting. 1 English User Manual. Is the most important thing to choose a signal booster, because the. GSM, 3G or 4G means different frequency in different countries. You might check your frequency before order it. The main unit would get warm after it has been worked for 30 minutes. If it does not get hot, please change another power adapter and test it again. If the booster still don’t work, please send emails to us. If there is still. After you install the booster, please adjust the outdoor antenna. You should get 2-3 bars of stable signal in the location where the outdoor antenna is fixed in, or the booster can’t work. Outdoor antenna should be installed 2 meters higher of your roof or put it on a high open place, so it can get better reception. If you can get full bars signal after you install the booster, but. Can’t make calls. Please make sure that Outdoor and Indoor antenna are seperated by wall to avoid interferrence, putting them as far as 10 meters. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. The item “4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13″ is in sale since Wednesday, October 24, 2018. This item is in the category “Cell Phones & Accessories\Cell Phone Accessories\Signal Boosters”. The seller is “repeaterbay” and is located in City of Industry California. This item can be shipped to United States.
  • Compatible Network: Verizon
  • Brand: PROUTONE
  • MPN: PR-K-L65VA-CYB
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Indoor/Outdoor
  • Country/Region of Manufacture: China
  • Model: PR-L65VA
  • Compatible Model: Universal
  • Manufacturer warranty: Yes

4G 700MHz Cell Phone Signal Booster Verizon LTE Mobile Repeater Kit for Band 13